Product Name: USB3.1 Type C to 2Ports MSATA SSD Raid HDD Enclosure

Function: while extending a through USB3.1 Type-C interface to two MSATA interfaces, two MSATA interface can simultaneously access two 3030 or 3050 specification SSD hard drive. Raid0 can form between two SSD, Raid1 or PM mode



Product Description:

      (1) USB3.1 Type-C Interface: LR31-1352S adopted recently APPLE, Intel, Microsoft and other leading manufacturers to promote the USB3.1 TYPE C interface theoretical transfer speeds of up to 10Gbps; faster than USB3.0 transfer speeds 1 times, while USB3.1 TYPE C interface supports both positive and negative plug, not required on the direction that the front and back insert can complete the pairing, which greatly improves the ease of USB interface.

      (2) compatible SSD Specifications: LR31-1352S compatible SSD MSATA interface. MSATA SSD currently on the market by volume, to distinguish between the main two sizes, namely 3030 and 3050 SSD fixation using two kinds .LR31-1352S pillars mobile (factory default setting for the 5030 shipments), perfectly compatible with 3030 or 3050 SSD hard drive, arbitrary.

      (3) SSD operating mode settings: LR31-1352S support Raid0, Raid1 and PM three operating modes. General factory default shipping mode Raid0, factory work settings can be changed according to customer demand.



Raid0: We all know, USB3.1 theoretical transfer rate of 10Gbps, while MSATA actually taking the SATA signal, the current maximum theoretical transfer speed of SATA is 6Gbps. For USB3.1 of 10Gbps for, SATA USB3.1 speed can not satisfy the appetite. Therefore, in order to solve the USB3.1 SATA speed run, but the question, we LR31-1352S specifically set a Raid0 operating mode. In Raid0 mode, two hard disk into a hard disk, and adding capacity, doubling the speed.



Raid1: When the name suggests is disk mirroring, in Raid1 mode, when simultaneously connected to two SSD hard drive, can only show relatively small capacity SSD, the entire disk capacity is smaller, but the data in the work, but a backup, data more stable.



PM: also known as disk arrays, are independent between each disk, while simultaneously connected to two SSD hard drive, hard disk capacity between two constant speed constant.



Plug USB3.1 data cable, check the working status of SSD

A.LED1 steady indicating that the computer has detected SSD1, LED1 blinks indicate SSD1 is in written or read state otherwise abnormal

B.LED2 steady indicating that the computer has detected SSD2, LED2 blinking indicates SSD1 is in written or read state otherwise abnormal