1 . Products according to the DC voltage termination voltage versions corresponding DC voltage, reverse power cut do .
2. first set up product features , use FS button to select , from 1-18 to select functions such as these functions are arranged 3.After selecting the function , double-click the FS button will display t, then time to adjust , with 8 Sel button and 0-9 Sel two buttons to adjust the time , 8 Sel button to select the adjustment which is 8 characters ,0-9 Sel is 8 will choose a good word to adjust the value ;
4 double- time adjustment , if any , in the choice of a good function , and then double-click the FB button appears t1, and then double-click displays t2, then use 8 Sel 0-9 Sel button and two buttons to adjust time, cycle timing then double-click will need to set the n word represents the number of tests , with 8 Sel button and 0-9 Sel two buttons to adjust the number .
5 seconds delay time 1-999 and 1-999 minutes by FB button automatically switches the long , showing A representative of the range is 1-999 seconds , the display b represents the range is 1-999 minutes .
6 features 17 and 18 do not need to adjust the time , these two features, the trigger signal to trigger interface has direct control relay .
When the middle of the L -side when the jumper is connected to a low level trigger , then a key switch in the IN terminal and DC- termination can also be used when the trigger switch , the jumper is connected to the middle and end H : 7 trigger selection , is the high level trigger .
The product parameters:
1 Dimensions : 63.5mm (L) * 38.5mm (W) * 18.5mm (H)
2 positioning hole size : 58.5mm * 33.5mm hole diameter : 3.1mm
3 Relay load capacity : 220V 10A AC or 30V 10A DC
4.24V Quiescent Current : 45mA Maximum power consumption : 130mA