Shop with DX Mobile Site Yes No

Jtron RAMPS 1.4 3D Printer / Offline Print Accessories - Purple

by Jtron
SKU: 381285
  • US$5.47

    35 %

  • 3.55
  • Free shipping To

  • Handling Time: Ships within 2-4 Business Days
  • Dispatch: Ships within 4-7 business days
  • Form Color:


Add To Cart Buy Now
Jtron RAMPS 1.4 3D Printer / Offline Print Accessories - Purple
Jtron RAMPS 1.4 3D Printer / Offline Print Accessories - Purple

Jtron RAMPS 1.4 3D Printer / Offline Print Accessories - Purple

US$3.55 US$5.47 35%OFF 0 (0 reviews)
Add To Cart


1. SPI mode

2. Support voltage:4.5 to 5.5V

3. Up to 50 MB/sec data transfer rate

4. 1 x Smart Borosilicate glass

5. Sits directly on a RAMPS.

6. Also be used with other microcontrollers

Testing your board

Put your SD RAMPS board onto an Arduino MEGA like this:


The RED LED should light up, indicating the board is powered.

Open the Serial Monitor in you Arduino environment. If the SD card is readable, it should read something like:

Wiring is correct and a card is present.

Card type: SDHC

Volume type is FAT16

Volume size (bytes): 822231040

Volume size (Kbytes): 802960

Volume size (Mbytes): 784

Files found on the card (name, date and size in bytes):

TEST.TXT 2011-08-10 14:14:40 0

TST2.TXT 2011-08-10 14:14:46 0

TST3.TXT 2011-08-10 14:14:54 0


1. The LED does not light up

Make sure the LED is mounted the right way. If the 74HC4050 is getting hot, you might have a short.

2. The test program says: initialization failed. Things to check: ...

Follow the advise of the program and check every step above. Check if your SD card works.

1. Connect your SD RAMPS like this to the RAMPS board:

2. Go to the file configuration.h and change the motherboard setting:

define MOTHERBOARD 33 3. Check that SD card support is enabled:

define SDSUPPORT 1 4. Make sure you are using 115200 for your baudrate, as Arduino doesn't support 250,000 baud.

5 Compile and upload the firmware.

6. Open the Serial Monitor from the Arduino IDE. Make sure the left select list reads newline. Enter the GCode M21 (init SD card). It should return ok.


Quantity1 piece
Form ColorPurple
MaterialPCB + Plastic
English Manual / SpecNo
Download Link
Dimensions & Weight
Dimensions 1.22 in x 0.79 in x 0.55 in (3.1 cm x 2 cm x 1.4 cm)
Weight 0.14 oz (4 g)
Packing List
1 x Printer accessories

All packages from are sent without DX logo or any information indicating Due to package variations from suppliers, the product packaging customers receive may be different from the images displayed.

To enable volume discounts on this site, use coupon code: BULKRATE during checkout. You will see a discount applied at the bottom of the shopping cart. Competitive pricing is available. Contact us for details.

Quantity 3+ units 5+ units 10+ units
Rate US$3.15 shipped US$3.14 shipped US$3.13 shipped

What is Bulk Rate? BulkRate is a semi-wholesale system with items priced separately from retail. When you use bulk rates, a flat $1.70 registered air mail fee will automatically be added to your cart to ensure delivery of package. While BulkRate's intention is to offer cheaper prices when you buy in bulk, because it is priced separately it on occassions show a higher than retail price. That's why we ask you to enter BULKRATE as a coupon code to manually activate the rates. You can always opt not to use the bulk rates. If you are looking for wholesale prices please feel free to contact us.

Customer's impression:
There are no customer's impression yet.
Create Review

Share your reviews, photos and videos here!

Review Program
There are no reviews yet, write a review and get DX points! What are DX points?


Post a new topic

Please note that DealExtreme Forums are not a sales or product support board. For support questions, please contact us via support ticket at for a guaranteed response. We make every effort to make the quickest replies.

Tags of this product

Add your tags:

Your last viewed items

Recommendations Based On Your Recent History

DX Everywhere