Wish
Shop with DX Mobile Site Yes No
DC 5A Drive Lithium Battery Charger w/ Voltmeter Ammeter DC-DC Module

DC 5A Drive Lithium Battery Charger w/ Voltmeter Ammeter DC-DC Module

DC 5A LED Drive Lithium Battery Charger with Voltmeter Ammeter DC-DC Module

0 (1)
SKU: 419279
  • US$9.53

    You Save 13 %

  • 8.27
  • Free shipping To UNITED STATES Via SuperSaver

    Ship to:
    Choose Shipping Method
    Shipping Service Shipping Cost Estimated Delivery Time Tracking Information
    FREE SHIPPING Typically ships 7-10 business days
    Typically ships 7-10 business days
    Typically ships 4-7 business days
    Typically ships 4-7 business days
    Typically ships 4-7 business days

    Please note: the standard and expedited shipping costs are only estimates; the actual shipping price will be shown on the order page.

    OK
  • Handling Time: Ships within 1 Business Days
  • Dispatch: Ships within 4-7 business days
Quantity: +
Quantity 3+ units 5+ units 10+ units More
Rate US$7.33 shipped US$7.31 shipped US$7.28 shipped

Related Products

DC 5A Drive Lithium Battery Charger w/ Voltmeter Ammeter DC-DC Module

DC 5A Drive Lithium Battery Charger w/ Voltmeter Ammeter DC-DC Module

US$8.27 US$9.53 13%OFF 0 (1)
ADD TO CART
Highlights :
Contains the voltmeter, ammeter, power meter, USB interface for charging the digital products.

Note:
1.When you use the product, the module inputs and outputs to be isolated from ground.
2.USB output voltage is consistent with the module, not a fixed 5V output. When charging for digital equipment, make sure USB output voltage is 5V.
3.Some customers report: “The module can not adjust the output voltage is always equal to the input voltage.” When you encounter this problem, please counterclockwise rotation of the “voltage potentiometer” 10 laps or more, then use the module you can adjust the output voltage. Because the factory default output voltage of about 20V.

Specifications
1.Input voltage range:5-36VDC
2.Output voltage range:1.25-32VDC adjustable
3.Output current: 0-5A
4.Output power: 75W
5.High efficiency up to 96%
6.Built in thermal shutdown function
7.Built in current limit function
8.Built in output short protection function
9.Input reverse polarity protection: None (if required, high current diode in series with the input).
10.L x W x H =68.2×38.8×15mm

Application
1.Use as a step-down modules with overcurrent protection
Usage:
(1) Adjust the right button so that “OUT” LED lighted, Digital meter shows the value of output voltage ,adjust the “voltage potentiometer” so that the output voltage reaches the value you want.
(2) Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined overcurrent protection value. (For example, the Digital meter displays the current value of 4A, then you can use the module to a maximum current of 4A)
(3) Connected to the load.

2.Use as a battery charger
Usage:
(1) Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA)
(2)Under no-load conditions, adjust the “Voltage potentiometer” so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V)
(3)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined Charging current value.
(4)Charge turn lamp current factory default is 0.1 times the charging current; (Battery during charging current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully   charged)
(5)connected to the battery charge.
(1,2,3,4 steps as: Output is unloaded, do not connect the battery)

3.Use as a LED constant current driver module
Usage:
(1)Adjust the “voltage potentiometer” so that the output voltage reaches the value you want.
(2)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined LED operating current.
(3)Connect LED, work.
(1,2 steps as: Output is unloaded, do not connect LED)

Voltmeter and ammeter calibration method:
Module with manual calibration function can correct display precision voltage and current, if you think the current voltage and current accuracy to meet the requirements, do not perform the following operations.

(1) Output voltage calibration steps
Step 1, adjust the right button so that “OUT” LED lighted, Digital meter shows the value of output voltage; Press the right button for more than 2 seconds, release, Digital meter and “OUT” LED flashes in synchronization so that you enter the output voltage calibration mode.
Step 2, press the right button (normal speed), the voltage value is adding up a unit; Press the left button, minus a unit; Due to a unit is less than 0.1V, the minimum voltage display to 0.1V, so you need to continuously press 1-5 times to see the voltmeter change 0.1V, how many times voltmeter change 0.1V by pressing the key, depending on the current display voltage, the higher the voltage, the fewer the number of press.
Step 3, press the right button for more than 2 seconds, release, to exit the output voltage calibration mode. All parameters set to automatically power down to save.

(2) Input voltage calibration steps
Step 1, adjust the right button so that “IN” LED lighted, Digital meter shows the value of input voltage; press the right button for more than 2 seconds, release, Digital meter and “IN” LED flashes in synchronization so that you enter the input voltage calibration mode.
Steps 2 and 3, consistent with the output voltage calibration method.

(3)Output current calibration steps
Step 1, adjust the right button so that Digital meter shows the value of output Current. Press the right button for more than 2 seconds, release, Digital meter flashes in synchronization so that you enter the output current calibration mode.
Step 2,Connected to the load, ammeter in series, adjust the right and left button to change the display of digital meter, so that is consistent with the ammeter display .


General
ModelN/A
Quantity1 piece
Form ColorBlue + Silver + Multi-Colored
MaterialPCB
Specification
Input Voltage5~36V
Output Voltage1.25~32V
Max. Output Current5A
Max. Output Power75W
Working Temperature-40~+85℃
Conversion Efficiency96%
English Manual / SpecYes
Download Link http://pan.baidu.com/s/1pJL7XsJ
Dimensions & Weight
Dimensions 2.76 in x 1.57 in x 0.59 in (7 cm x 4 cm x 1.5 cm)
Weight 1.2 oz (34 g)
Packing List
1 x Module
1 x Heatsink
4 x Pillars

All packages from DX.com are sent without DX logo or any information indicating DX.com. Due to package variations from suppliers, the product packaging customers receive may be different from the images displayed.

To enable volume discounts on this site, use coupon code: BULKRATE during checkout. You will see a discount applied at the bottom of the shopping cart. Competitive pricing is available. Contact us for details.

Quantity 3+ units 5+ units 10+ units
Rate US$7.33 shipped US$7.31 shipped US$7.28 shipped

What is Bulk Rate? BulkRate is a semi-wholesale system with items priced separately from retail. When you use bulk rates, a flat $1.70 registered air mail fee will automatically be added to your cart to ensure delivery of package. While BulkRate's intention is to offer cheaper prices when you buy in bulk, because it is priced separately it on occassions show a higher than retail price. That's why we ask you to enter BULKRATE as a coupon code to manually activate the rates. You can always opt not to use the bulk rates. If you are looking for wholesale prices please feel free to contact us.

Wholesale Inquiry

  • US$8.27

    Free shipping

Do you want to buy more and get a better price?

Please fill in the short form below and we will try to work on it and provide you a better price.

SKU:
419279
*Order Quantity:
Please enter a valid number.
*Your E-mail Address:
Unless you are already on our newsletters list,we will not send any e-mail to you that are not related to this review.
*Your Country:
Provide a Province/State
*Shipping Method:
*Notes / Details:

(price, bundle, special offer, gifts, etc)

Validation Code:
Validation Code
Can't see it?
Your inquiry is submitted successfully!
* The information requested above is used for quotation only.We will get back to you within 48 hours upon receving your inquiry.
0.0
Customer's impression:
There are no customer's impression yet.
Create Review

Share your reviews, photos and videos here!

Review Program

Tags of this product

Add your tags:

Discussions

Post a new topic

Please note that DealExtreme Forums are not a sales or product support board. For support questions, please contact us via support ticket at http://cs.dx.com/ for a guaranteed response. We make every effort to make the quickest replies.

Recommendations Based On Your Recent History

1 /

Your last viewed items

DX Everywhere