Aimometer AMPX1 Multi-functional Process Calibrator Multimeter

Aimometer AMPX1 High Accuracy Multi-functional Process Calibrator Multimeter - Black + Blue

SKU: 404256 (Added on -)
  • US$206.97
  • 198.99
  • CHINADXSOUL

    Free shipping To
    UNITED STATES
    Free Shipping With Tracking Number

  • Dispatch: Ships within 7-10 business days
  • Form Color:

    Black + Blue

Aimometer AMPX1 Multi-functional Process Calibrator Multimeter
This SKU 404256 is available in DXSOUL with Free Expedited delivery. DXSOUL: 901404256


AMPX1 is a source and measurement tool . Is used to 0 -24 mA / 4-20 mA current loop and 0 - 10 V / 0-100 mV output , also has 4000 counts integrated multimeter function.
1.0.02% high accuracy of DC V/A input and output.
2.Double injection molding process provides users a better feel and improve product durability.
3.The application of 24 bits a high-precision AD and low zero drift op-amp.
4.The four levels of gold-plated circuit board,.Signals of input and output designed separately, to ensure that the small signal stability.
5.High-class probes, long-term use, will not be damaged easily.
Multimeter Function Descriptions
Along with the conventional measurement functions this meter also possesses some special functions which being described as follows:
Automatic and manual ranges: When turning on the meter’s power switch the meter defaults the automatic range state(AUTO displaying), and simultaneously it will automatically select the proper range according to the measured electric parameters. If OL being displayed under automatic range, it indicates the measured value exceeding the meter’s maximum range. Pressing the RANGE key under the automatic range the meter will enter the manual range(MANUAL displaying), then pressing the RANGE key again it will be possible to select the required range. The indicator for range will display the maximum value of this range. If OL displaying under the manual range, it indicates the measured value exceeding the selected range. Press the RANGE key under the manual range for two seconds and then release it, the meter will go back to the automatic range state.
Linear frequency measurement: Pressing the Hz% key when the meter performing measurements on AC voltage or current as well as on mixture signal of AC and DC, it will be capable to measure the frequency of the AC component. However it has a certain requirements on the amplitude of the AC component.
Logic impulse duty ratio measurement: logic impulse duty ratio refers to: (high level width/impulse cycle)×100%
Diode measurement: during diode measurement the meter is indicating to the forward voltage drop of the diode
Relative measurement: during relative measurement the meter remembers internally the instantaneously measured value(called initial value)when pressing the REL Δ key, and the later displaying value being:present value – initial value
The relative measurement value reflects the changes of the measured value. It also can be used to take off the errors brought about by lead resistance or distributed capacitance during measuring low resistance and low capacitance. Due to subtraction calculation, negative value may appear during measuring AC current, resistance and capacitance.
Low voltage detection: when the meter detecting the total voltage of the batteries lower than 6.8V, the symbol on the LCD screen will be lighted to prompt the batteries should be replaced.
Calibrator Operation Methods
Never apply more than 30V between any two jacks In the calibrator functions .
DC V measurement
This function for the high precision measurement under the calibrator, the maximum voltage up to 10 V, two range with 10 v and 100 mv
1.Turn on the power switch
2.set the rotary switch to the position mV/V.
3.Press the input/output conversion key to get the input indicator .
4.Press the V/mV conversion key ,make it indicate VDC or mVDC ,at the range of measure you need.
5.Put the red test lead in + jack 3,black one to the - jack1, shown as in Figure 3-1。
6.Connect the red test lead with the positive of voltage which is waiting for measurement, black one to the negative(ground).
7.The value of result show 15.
DC V output
1.Turn on the power switch
2.Set the rotary switch to the position of mV/V.
3.Press the input/output conversion key to get the output indicator .
4.Press the V/mV conversion key,make it indicate VDC or mVDC ,at the range of measure you need.
5.Press the value adjust key11 12 13 14make the value you want。
6.Put the red test lead in + jack 3,black one to the - jack1, shown as in Figure 3-2。
7.Connect the red test lead with the positive of voltage which is waiting for measurement, black one to the negative(ground).
8.If you want to change the output value or range, then press the value adjust key 11 12 13 14 or the V mV conversion key 9.
DC mA measurement
1.Turn on the power switch
2.Set the rotary switch to the position of mA %.
3.Press the input/output conversion key to get the input indicator .
4.Press the mA/mA % conversion key,make it indicate mA or mA%,at the range of measure you need.
5.Put the red test lead in + jack 3,black one to the - jack1, shown as in Figure 3-3。
6.Connect the red test lead with the positive of current which is waiting for measurement, black one to the negative(ground).
7.The value of result show 15.
DCmA outpute
1.Turn on the power switch
2.Set the rotary switch to the position of mA %.
8.Press the input/output conversion key to get the output indicator .
3.Put the red test lead in + jack 3,black one to the + jack1, shown as in Figure 3-4。
4.Connect the red test lead with the positive of current , black one to the negative(ground).
5.Press the mA/mA %conversion key,make it indicate mA or mA%,at the range of measure you need.
6.Press the value adjust key11 12 13 14make the value you want。
7.If you want to change the output value or range, then press the value adjust key 11 12 13 14 or the mA/mA % conversion key 9.
General
Brandaimometer
ModelAMPX1
Quantity1Piece
Form ColorBlack + Blue
MaterialIron + copper + ABS
Specification
Screen Size3.2inch
DC Voltage400mV/4V/40V/400V/1000V ±(0.5% +2)
AC Voltage400mV/4V/40V/400V/750V ±(0.8% +2)
DC Current400µA/4000µA/40mA/400mA ±(0.8% +2) , 4A/10A ±(1.2% +2)
AC Current400µA/4000µA/40mA/400mA ±(1.5% +2) , 4A/10A ±(3.0% +2)
Resistance400/4k/40K/400K/4M/40M ±(1.2% +2)
Capacitance Accuracy50nF/500nF/5µF/50µF/100µF ±(3% +5)
Frequency Accuracy0~5MHz ±(0.5% +2)
Transistor TestNo
Temperature TestNo
Frequency TestYes
Power Consumption TestNo
Short-Circuit ProtectionYes
Short Curcuit BuzzYes
Auto Power OffYes
Powered ByAAA Battery
Battery Number6
Battery included or notYes
Other Features
CertificationCE
Dimensions & Weight
Dimensions 8.07 in x 4.13 in x 1.85 in (20.5 cm x 10.5 cm x 4.7 cm)
Weight 19.61 oz (556 g)
Packing List
1 x Multimeter
2 x Test pens (105+/-2cm-cable)
2 x Alligator clips
1 x 10A / 500V insurance tube
1 x 500mA / 1000V insurance tube
1 x Manual and software USB flash drive
1 x USB cable (123+/-2cm)
6 x AAA batteries

All packages from DX.com are sent without DX logo or any information indicating DX.com. Due to package variations from suppliers, the product packaging customers receive may be different from the images displayed.

To enable volume discounts on this site, use coupon code: BULKRATE during checkout. You will see a discount applied at the bottom of the shopping cart. Competitive pricing is available. Contact us for details.

Quantity 3+ units 5+ units 10+ units
Rate US$197.29 shipped US$196.69 shipped US$196.10 shipped

What is Bulk Rate? BulkRate is a semi-wholesale system with items priced separately from retail. When you use bulk rates, a flat $1.70 registered air mail fee will automatically be added to your cart to ensure delivery of package. While BulkRate's intention is to offer cheaper prices when you buy in bulk, because it is priced separately it on occassions show a higher than retail price. That's why we ask you to enter BULKRATE as a coupon code to manually activate the rates. You can always opt not to use the bulk rates. If you are looking for wholesale prices please feel free to contact us.

Looking to get even more?
Try VolumeRate - Gadgets Wholesale

0.0
Customer's impression:
There are no customer's impression yet.
Create Review

Share your reviews, photos and videos here!

Review Program
There are no reviews yet, write a review and get DX points! What are DX points?

Discussions

Post a new topic

Please note that DealExtreme Forums are not a sales or product support board. For support questions, please contact us via support ticket at http://cs.dx.com/ for a guaranteed response. We make every effort to make the quickest replies.

Tags of this product

Add your tags:

Your last viewed items

Recommendations Based On Your Recent History

DX Everywhere