4Pin IR Infrared Obstacle Avoidance Sensor Module

Suitable for Arduino DIY Smart Car Robot

SKU: 436279 (Added on -)
  • US$3.91
  • 3.85
  • CHINADXSOUL

    Free shipping To
    UNITED STATES

  • Dispatch: Ships within 7-10 business days
  • Form Color:

    Black + Multicolor

4Pin IR Infrared Obstacle Avoidance Sensor Module
This SKU 436279 is available in DXSOUL with Free Expedited delivery. DXSOUL: 901436279
Object is sensed output 0, output 1 is not sensitive to the time, directly with 3V and 5V microcontroller IO port connected.
Sensing distance 2-40 cm, distance, good anti-jamming capability. (Note: The infrared sensor can not detect all objects get the same distance, objects of different colors of light reflectance of different objects closer darker black shorter distance detected, the sensor 2-40 cm is measured against the white wall of)
Speed, suitable for smart car obstacle avoidance, black and white line tracking, anti-drop, product counters, cutting lines, liquid level detection.
This sensor is made with black and white lines tracing the car ran without black line on white paper, available in concrete The yellow complex environment such as the black line patrol track. As long as the black line around the slightly lighter color than black can, eliminating the traditional moves, so that environmental layout easier.
The sensor 3 to 6V supply, wide range, suitable for 3V and 5V MCU system.
With Enable, EN terminal is equal to "1" when the sensor does not work, equal to "0" when working. Jump on the sensor end cap long after the EN grounding plug (EN long as "0"). To use the EN pin when the jumper cap is removed.
Frequency adjustment potentiometer is used to adjust the carrier frequency of the infrared emission tube, because the integration receiver 38KHZ in particular when the carrier frequency is the most sensitive. The 502 resistor clockwise transferred do (that is, the launch tube at maximum brightness), and then at a white wall tone 103 resistance, has been transferred to the sensing distance is the farthest so far so that the sensor will work in the best state
Working voltage: DC 3.3V-5V
Working current: 20mAh
Working temperature: -10'C~+50'C
Detection distance: 2~40cm
IO interface: 4 line (-/+/S/EN)
Output signal: TTL Level
Adjusting mode: Multi resistance regulation
Effective angle: 35°
Size: 4.5 * 1.1cm(approx)
Here we use the obstacle avoidance module and digital 13 interface with LED to build a simple circuit, making the obstacle avoidance warning light, accessing the avoidance sensor to digital 3 interface, when the obstacle avoidance sensor senses the signal, LED light, otherwise off.

Program code:
   int Led=13;//define LED interface
   int buttonpin=3; //define obstacle avoidance interface
   int val;//define Digital variable val
   void setup()
   {
   pinMode(Led, OUTPUT);//define LED is output interface
   pinMode(button pin, INPUT);//define obstacle avoidance is output interface
   }
   void loop()
   {
   val=digitalRead(buttonpin);//reading the value from 3 digital interface to val
   if(val==HIGH)//when the obstacle avoidance sensor senses the signal, LED flash
   {
   digitalWrite(Led,HIGH);
   }
   else
   {
   digitalWrite(Led,LOW);
   }
   }
   
General
Model-
Quantity1Piece
Form ColorBlack + Multicolor
MaterialFR4
Specification
ApplicationFor Arduino DIY Smart Car Robot
Working Voltage 3~6V
Dimensions & Weight
Dimensions 1.81 in x 0.63 in x 0.47 in (4.6 cm x 1.6 cm x 1.2 cm)
Weight 0.14 oz (4 g)
Packing List
1 * IR Infrared Obstacle Avoidance Sensor Module

All packages from DX.com are sent without DX logo or any information indicating DX.com. Due to package variations from suppliers, the product packaging customers receive may be different from the images displayed.

To enable volume discounts on this site, use coupon code: BULKRATE during checkout. You will see a discount applied at the bottom of the shopping cart. Competitive pricing is available. Contact us for details.

Quantity 3+ units 5+ units 10+ units
Rate US$3.41 shipped US$3.40 shipped US$3.39 shipped

What is Bulk Rate? BulkRate is a semi-wholesale system with items priced separately from retail. When you use bulk rates, a flat $1.70 registered air mail fee will automatically be added to your cart to ensure delivery of package. While BulkRate's intention is to offer cheaper prices when you buy in bulk, because it is priced separately it on occassions show a higher than retail price. That's why we ask you to enter BULKRATE as a coupon code to manually activate the rates. You can always opt not to use the bulk rates. If you are looking for wholesale prices please feel free to contact us.

Looking to get even more?
Try VolumeRate - Gadgets Wholesale

0.0
Customer's impression:
There are no customer's impression yet.
Create Review

Share your reviews, photos and videos here!

Review Program
There are no reviews yet, write a review and get DX points! What are DX points?

Discussions

Post a new topic

Please note that DealExtreme Forums are not a sales or product support board. For support questions, please contact us via support ticket at http://cs.dx.com/ for a guaranteed response. We make every effort to make the quickest replies.

Tags of this product

Add your tags:

Your last viewed items

Recommendations Based On Your Recent History

DX Everywhere