DX  » view all waterproof ir » waterproof ir

waterproof ir

Customers Who Bought waterproof ir Also bought

Welcome to our waterproof ir online shop. DX offers worldwide free shipping and faster delivery. What are you waiting for? Buy now!

waterproof ir Customers Reviews

  • Bad through wall distance

    posted by romanoza

    Good price, many different alarm settings
    MMS protocol online view
    Good stability in different weather conditions
    Simple soft
    Good choice for this price and for country house or flat protection
  • Good choice, but you need to make some fixes!

    posted by XaoS87

    - Very good build quality as for me. (Except broken pixels I have..)
    - You can adjust image quality (focus) by regulating inner lens (you can unscrew camera's front head without bolts)
    - IR lights power is very good
    - Camera's sensor is very good for indoor use (but big issue for outdoor - see cons)
    - You can find some tools and firmware updates at the MayGion's site. (their site sometimes down)
    - You can use /videostream.cgi for video streaming, or just MJPEG by requesting /snap.jpg continuously.
    Please note, you should add "?usr=admin&pwd=admin" (v3.1 firmware) to the each query (without "). Of course if admin:admin is your login:password.
    Please note, for firmware v3.0 use "?usEr=admin&pwd=admin"... Yes, just letter "E" is the difference.
    - If you use 320x240 you'll not experience any issues with camera's sensor like described in cons.
    Russian/Ukrainian winter too cold sometimes...
    - I'm going to use it outdoor even in winter, so I need additional heater inside it.
    I've designed small improvement to my camera: you can buy 12V heater replacement (for soldering station for example) $3-10, insert it inside the camera to the bottom side, make good connection between it and the camera's box using thermal paste (like for cooler for CPU) and connect it with small thermal relay (which turns on when temperature below 0 or even 10 degrees).
    Than just connect this items to the power source wires. Make sure that you have enough power from supply: camera wants about 1A, my heater 0.6-1A, so I've replaced power supply with 12V 2A...
    I'm developing surveillance system for friend's store. So it's not expensive good choice, after spent my 10 nights on debugging/research/fixes...
    I'm very advise you to upgrade firmware to the latest one. But please, read upgrading manual carefully! It's easy, just uploading some files through FTP to the camera...
  • Not so bad

    posted by jukka.k

    - Image quality in good lighting contitions is quite good- Camera is quite easy to configure, although it's internal software is copied from model which has electrical tilt etc. This can be confusing at start.
    - It is possible to use iSpy surveillance software with this camera- Camera gets by default it's IP from DHCP and uses port 81. Wireless connection is disabled by default.
    Not so bad
  • 2.4GHz Waterproof Wireless Car Rearview Camera w/ 5-LED IR Night Version -

    posted by petemisu

    very good quality-precio.facil to install, the picture is good and the camera takes away lines (green yellow, red),depends on where you put the camera will have to decide the limit and learn
    need to improve the specification of products (mainly electrical or electronic)
    none
  • Nice video

    posted by samuelpenha

    For the low resolution of the camera the image is very nice - the night vision is also pretty satisfactory.Nice assemblage, resistent material (I think it's alluminium). Good overall impression.
    Nice cost x benefits. I left on sun and rain and it works fine in these environment.
    I do recommend this camera - I myself intend to buy other to complete my system.

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections