DX  » ac switch »  view all switch ac 250v » switch ac 250v

switch ac 250v

You can easily find the latest low priced switch ac 250v offered at our online shop. At DX all products are checked in the quality control department before being packed and sent to you. DX provides a secure and comfortable shopping environment.

switch ac 250v Customers Reviews

  • Excellent

    posted by gregwalton

    Amazingly good quality and very cheap. How many more pros do you need? It is fused, separately switched with neon indicators. It sits well in the wall socket, and its own sockets hold other plugs well. Excellent!
    Personally I would like to see the sockets on either side to be orientated with the earth pin at the top. This would make it possible to plug in little "wall wart" chargers (like phone chargers), most of which have leads coming out of the top in line with the earth pin.
    Brilliant for the price. I shall be ordering more.
  • Perfect switches for multipurpose use

    posted by pjdavao

    Good quality with striking orange colour. Easy to screw on wires onto pins. You can do also away with screws and use other suitable slip-on connectors to to attach wires securely. Very simple to install and operate. The flip switch operates smoothly and click firmly.
    Good to have waterproof casing for switches as an added value on purchase
    Value for your money. Good quality at cheap price. Plastic casing housing mechanism is sturdy and tough. Pins and screws are smooth and good finish.
  • Quite well made but 10A is too much

    posted by ebpDoug

    Well made for light to medium duty
    The quality of the molded plastic parts is good. The pedal is a bit too flexible (can twist a bit if pressed on one side, rather than centrally), but this does not seem to interfere with operation. This switch is for light to moderate duty operations - not for an industrial application where people wearing heavy boots would use it. The actual switch is single-pole double-throw ("form C"). The cable is soft and flexible and quite firmly clamped to the assembly, though there is no extra flex-protective strain relief. The conductors are too small for ten amperes. I would estimate the conductors to be about 22AWG, so they probably should be limited to about 5 to 7 amps.Even though there are no marked safety agency approvals, this switch probably is safe for AC mains use, given that all parts near the actual switch are plastic.
    quite nice for the price
  • Works with small tweaks

    posted by regireg

    I have tons of power adaptors for various gadgets at home, and only a small portion of them is actually being used at any point in time. I hate constantly plug them in/out all the time and have been looking for a power strip with individual switches to be able to just switch them off with a press of a button.This model works great, the switches are of a good quality and provide visual indication separately for each socket.
    The wires are thinner compared to what is being used here for 2400W appliances. I am not sure it is a real problem - I have been using the unit for several months without any issues. However I did not really put it under a lot of load. If you need it for high power appliances, you might need to replace the power cord.
    With a small modification works great for low power load. I have not tested with high load.
  • Great for hobby or DIY projects

    posted by rokairala

    Small switch with 3 pins, giving the option to close the circuit when the switch is open or closed, improving usability. Sensitive, just a few millimeters are enough to activate the switch. Up to 220V, so no need to use a relay circuit or limit to 5V or 12V projects.
    I'm using as an proximity switch to turn a light on when I open the closet door. Does a great job and was easy to install. Can be used as proximity detector for any DIY project, including Arduino based robots.
    Simple and small proximity switch for 110~220V and a great price.

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections