DX  » view all single color led controller » single color led controller

single color led controller

The perfect single color led controller here to meet all your needs. Dx offers a range of products from consumer electronics to outdoor sports gadgets and so much more. At DX there is something to suit everyone. DX is the best cool gadgets provider, so take action now and come take a look at our site dx.com.

single color led controller Customers Reviews

  • Does the job

    posted by GodHammer

    Wireless signal is great, I can still control the led strip even 2 rooms away.- wireless and not infrared.- 9 levels of brightness- 9 blinking modes- you can change the speed of each mode- memory of the last brightness and mode- didn't heat up after 5-6 hours operating at full and/or 50% brightness
    On the input part of the controller it says 5-25V - and for the output just LED.I've used a CCD camera adapter to power it. The adapted output was rated at 12V, but was 12.3V . After i've connected the controller, the output of the controller was 11.9 at full brightness.... so, it might some sort of voltage regulator inside (I'm not a great with electronics)
    The brightness is controlled by changing the output voltage:100% - 11.9V50% - 5.8V25% - 3.3VA list of all the voltages (from 100% brightness to minimum brightness):step 1 - 11.9Vstep 2 - 9.2Vstep 3 - 7.3Vstep 4 - 5.8Vstep 5 - 4.7Vstep 6 - 3.9Vstep 7 - 3.3Vstep 8 - 2.8Vstep 9 - 2.1VThere is little fluctuation @0.03V on some brightness levels.
  • Nice simple dimmer with flash modes

    posted by Wudan

    Very simple and small constructionStandard 5.5x2.1mm female plug for 12v inStandard 5.5x2.1mm male plug for connection to LED
    Modes appear to be following:Long on - short offLong off - short onSOS (three short - three long - three short - pause)Fast blink - long pauseFlicker (great for candle effect)Pulse to offPulse to dimStrobe
    Good way to control LED light bars running on 12v.I have used for controlling SKU: 81028 in my projects
  • Works sweet

    posted by tracyching

    Super easy to get up and running. Connected this to LED dome light 12v 8.9w panel. Works nice in aquarium hood. RF signal range works across the room - very nice and convenient.
    May not work with all 330mA drivers. It didn't work with SKU 47060 current source. LED Light flickered at 50% with 7w COB LED 22volts. SKU 47060 driver has design flaw.
    Great but expensive.
  • Nicely made

    posted by murcod

    Appear to be very well made. The remote comes with a battery installed and has a sandwiched silicone membrane between both halves- so should be waterproof (or at least water resistant.)Dimming function works very well. The remote seems to work well at distance - even through a couple of internal house walls at around 20m.
    Good value. Draws 8ma standby current when off so won't flatten a battery in a hurry.
    Worth buying.
  • Excellent Product! Hard to find!

    posted by Drovers

    One of VERY few 3 channel single colour LED remote controllers currently on the market.VERY Well built, solid controller box and well made remote.Memory function on remote is very handy, enables memory function when device is turned on via remote to the setting programmed.
    Am powering this item with SKU: 56109 which is providing AMPLE amounts of power to run 8 30cm LED strips, am planning on adding more strips to this in the near future.
    Excellent product, have purchased a few already and will be purchasing more in the near future.

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections