DX  » view all servo gears » servo gears

servo gears

You will be surprised our best servo gears with an artful design and an amazing price. Our customer service team will repond promptly to your questions, making your shopping experience stress free and easier. With your support, we can do better.

servo gears Customers Reviews

  • Good servos

    posted by SponsBob

    These are very good servos. They come with many horns so there is always one right for you! The servos are usable in many ways. I also like the color, blue is nicer than black.
    if you need a small servo for your experiments this one is good. I modified two of them for continuous rotation, they work like a charm!
    I have used lots of these in my experiments and I am satisfied with them; The more you use them the cheaper they get, it is good value for money.
  • perfect powerful digital servo

    posted by mauroelettrico

    Very powerful and rapid standard digital servo.It fit a little hard in my dex410, but it's not a problem.Very long wire, i had to open and cut three wires to reduce the lenght of cable. I desoldered and resoldered on mobo to make a nice job.You can't expect a better servo for this price, his value is about 40 euros for a branded servo with technical specification like this one
    This is not a servo, it's a dream, to buy for a so low price a so perfect servo.
    mount it on your model and forget about it. It will work, it's very rapid and strong. I'm very happy with this servo, and i'll buy a dozen
  • Cheap servos

    posted by ejinguan

    Small, lightweight and most importantly cheap! Bought some for some robotics projects with Arduino.Tried to modify into continuous rotation servos - it is possible even with this small size.Cheap enough that after melting one down, it's a small cost to pay to learn how these work.Torque is relatively strong: calculations show it probably can lift 100g weight at a 15cm distance.
    Initial order shipped with one servo only. After raising a ticket, I got my full order subsequently.
    Cheap and good for the price!
  • MG995 Servo review

    posted by silbo

    Good price, good torque, good power consumption (100mA) when rotating. All gears are metal inside the servo. The servos can be edited to make them continues, which is what I did. Good internet tutorials can be found for that http://www.uscoles.com/kapcontinuous.html
    Where are the continues servos in DX :D,also didn't find any wheels to build my sumorobot.
    For the price, awesome torque and speed. Just watch out, the peak current was over 2A when I was powering two motors and changed their direction simultaneously.
  • Very tiny servo

    posted by Ketse89

    * Very small
    * Good torgue for size
    * Comes with 4 kinds of plastic arms.
    I tested this with regulated 5.0V supply, and ATmega128 microcontroller giving continuous pwm-signal of 50Hz and pulsewidth of 1-2ms. Usually servos should turn with that signal from 0° to 180°, but this only turned about 90°. I confirmed with oscilloscope that my control signal is ok, so I guess that non-excepted turning is somehow caused by this servo.
    If you need very tiny servo, this is for you. Just keep in mind that this is fragile because case is not glued.

DX Everywhere