DX  » red bulb » view all red brake bulb » red brake bulb

red brake bulb

Customers Who Bought red brake bulb Also bought

You'll find the best red brake bulb for you here. At DX we strive to provide the best service possible for our customers, with a prompt and helpful response. Your support is our greatest motivation.

red brake bulb Customers Reviews

  • Quality bulb

    posted by Loner911

    The led bulb fits directly into the original 1157 filament bulb socket. The LEDs are arranged neatly and soldered onto the pcb, giving it a all round 360 degrees coverage.
    Been using for 6 months, so far color and brightness remains constant.
    Do look out for space if you wish to retrofit your filament bulb with this led version. I have tried using in other cars but was unable to fit due to the bulb hitting the reflective lens
  • Good for what I wanted

    posted by Blizz4Runner

    Bought them for my cross bike, I was tired of blowing bulbs due to the tail bouncing on the dirt roads. Remove the old filament bulb, put that on and you're set!
    For the bike is perfect, also good for mine that has no battery. Now I don't have headlight dimming when braking.
    Bought them for my cross bike, I was tired of blowing bulbs due to the tail bouncing on the dirt roads. Remove the old filament bulb, put that on and you're set!
    For the bike is perfect, also good for mine that has no battery. Now I don't have headlight dimming when braking.
    Quality could be better. At first it was not working properly, it was the sticker on the socket isolating the earth.
    Tried the other one in my car and they're good at night but not under sunlight. Tail light is more or less the same as with the incandescent, brake light is dimmer with the LED bulb.
  • The only brake-light for Europe

    posted by Polonium

    After some weeks of testing i concluded that:
    -this light gives a lot more light than the original
    -light is scattered along all sides
    -brightness difference between normal and brake light is acceptable
    - will fit is a small hole: diameter is smaller than the original bulb.
    Because there are 6 light sources, the light is scattered into many directions. Unlike the LED lamps with 3 or 4 LED's IN FRONT, this lamp is best used with a "reflector" design.
    Very happy to have these in my car, only i want these also in single pin to replace my rear fog lights!
  • Not a prefect replacement for P21/5W

    posted by udiba

    - No hassle replacement of the P21/5W stop/tail light.- doesn't get nearly as hot as incandescent- Never have to worry about a burnt one again.- The difference between low and high light is noticeable.- Pretty good light distribution (front and side).
    Can make do with these, but if you want the exact same light levels as incandescent, look for brighter ones.If you don't have a separate high-mount stop lamp, i wouldn't recommend these, as the change of light level alone may not be enough to alert the driver behind you when braking.
  • Works well, bright, average spread

    posted by realbriguy

    Fast response time to trigger voltage. Instant on/off as you would expect from LED technology. Bulb is fairly bright - I would say almost as bright as an incandescent bulb. Low power draw/consumption leads to longer alternator and battery life. Colour hue is slightly deeper red than incandescent. It is closer to a "cherry" red, rather than a "candy" red.
    Dual filament bulb for Off/Hi/Low function - works exactly as it should. Difference between Hi and Low is quite noticeable.
    Overall, it does as it is expected to. Would I buy it again? Not sure... the fact it's not as bright as incandescent causes me to re-think it, particularly at this price point.

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections