DX  » view all protective board » protective board

protective board

On this page, you can find a wide selection of protective board. As the number 1 cool gadgets provider, DX provides and delivers high quality products from China, worldwide. We try our best to make your shopping experience stress free, so you can have the best shopping experience available.

protective board Customers Reviews

  • Seems to work

    posted by Meow88

    Very cheap
    Well built
    Long enough tabs
    Fast delivery
    Seems to work fine.
    I bought these to replace a stock protection circuit i had on a blue trustfire 18650. I had stripped out the trustfire's circuit and transferred it to my diy parallel 8 cell pack.
    It couldnt run my voltage booster circuit connected to a 6W 12V fan, because the initial current surge kept tripping the protection circuit. It was too sensitive.
    Swapped to this chip and it could handle the surge current without tripping. Great.
    Get it, its cheap. I soldered them to JST cables i bought from DX, heatshrunk the tabs and wires to protect them from short circuiting. Now i have a detachable protection circuit to use on my unprotected battery packs.
  • ardupilot

    posted by Roelke2

    very sturdy case for the ardupilot board. Have tried it with the HKpilot from ** and it works great. it even comes with 2 pieces of 3M sticky pads which are really tough to get off once they are on the board
    too bad that there isn't a little foam piece to cover up the barometer cause that has the tension to spass out sometimes in the wind.
    if your looking for a good case for your ardupilot board this is it. great design. very compact onlt make sure you have the board where the headers for the in and outputs are facing upwards.
  • Working well. Good choice for li-ion batteries.

    posted by santus1983

    Protection circuit board for 3.6V li-ion battery pack. Protects li-ion bateries from overcharging and overdischarging. Current protection limmit ~4A. Overdischarge protection limited ~2.4V, could be higher ~3V. Overcharge protection limited ~4.25V and here's ok.
    Positive wire is too short for 18650 batteries, but i changed to longer and all ok.
    Very useful thing using bateries in flashlights who do not have protection from overdischarging.
  • Great item if you have girls in the house

    posted by Maltopia

    The case fits very well on the Wii with a minor exception being there are too many 'studs' on the underneath - more than there are holes (which they press into) on the bottom of the balance board.However, it does fit on securely and is non-slip giving some good grip. It is easy to clean as well if dirty feet step on.
    Great buy, and if you have young girls in the house, they will think it is very cute.
  • The best product to procect your wii fit

    posted by scorpiondead

    Good to protect from dirt and small strokes that may occur in transportThe gameplay with this accessory remains the sameComes with a rubber that fit the wii fit which causes the silicon always be attached to your wii fitFits perfectly into the wii fit it's great
    Nothing in particular I think is one of the best accessories you can buy for your wii fit

DX Everywhere