DX  » motion sensor » view all motion detector sensor » motion detector sensor

motion detector sensor

You can easily find the latest low priced motion detector sensor offered at our online shop. Customers worldwide including Russia, Brazil, America, Spain all choose DX as their preferred online shopping website. We recommend ac sensor motion, e27 motion sensor as hot products. DX provides the best online shopping service for you.
Related Hot Products: sensor motion wall

motion detector sensor Customers Reviews

  • its good

    posted by grunte2010

    It is very good goods. All works. All functions are present. This that that I wanted.
    Passive infra-red detector IS-215 / IS-215T the companies Р&- Systems (trade mark IntelliSense) provides reliable detection at the reasonable price. The optical system forms the dense diagram of an orientation with a zone of detection 12 х 12 meters, including two petals, directed directly downwards under the detector. IS-215 / IS-215T has the gauge of opening of the case, it is steady against influence of white light and a radio noise. The detector is compact, attractive, simple in installation and service. It can be established{installed} inside of a protected premise{room} both on a wall, and in a corner without an arm or on an arm.
    All works. All functions are present. This that that I wanted.
  • Good product some error in product description

    posted by andrjoha

    Relativ smal but the circuit boards could be smaler. and does what it should do. Only short time testing but, a nice product for the price. Bouth of the circuit boards has holes so easily fixed to something. The timing potentiometer could have a + and - for easier adjustment of the time.
    In my opinion and with a "couple" of years of experiens in electronics. The relay on the circuit board is marked with 12V DC, this means that the product description it says 5-24V. Tested the board with 6volts and the relay didn´t pull befor you tapped on it. If you go higher than 12V it could break. I would recommend 9-16V.
    I got this for testing purposes only but I´m preaty shure I will use it for a light project in the future. If you need a cheap IR-motion detector buy this.
  • Good for the price

    posted by owar

    -Price-Range
    I think that the relay is not the best solution.It should be replaced with mosfet so the circuit could work with 5V input.Another thing is that the delay can not be changed maybe with just some trimmer.
    For the price it is good but it could be better
  • very good sensor, works very well with raspberry pi

    posted by zhuyi

    somewhat low cost, couldn't get the cheaper one from DX, had to order this.package is as usual DX standard. Very easy to understand the connections, +5V, Ground, signal out, can adjust the holding time and sensitivity. Detect distance is pretty good, tried at least 7-10 meters, no problem.
    This is a very good sensor for DIY project, I believe it's a standard template design, since the layout is the same as rest of the similar products all over the web.
    worth to buy, highly recommended.
  • Hi quality Motion Detector

    posted by jml@isep.ipp.pt

    This is a DT-7225 from Honeywell. I received it in its original case. Detailed specification can be found in the Honeywell catalogue. I own and have worked with several PIR detectors and I can state that this is a very high quality equipment. It is very sensitive and very stable. It looks well build.
    This detector includes a tamper switch.The included LED can be considered excessive lighter, specially for dark environments like bed rooms. It can be turned off.
    Good choice when the quality is your fist demand.

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections