DX  » timer switch »  view all lcd timer switch » lcd timer switch

lcd timer switch

Customers Who Bought lcd timer switch Also bought

Every single lcd timer switch displayed here is of a high level and the price is reasonable. As the number 1 cool gadgets provider, DX provides and delivers high quality products from China, worldwide. DX is the best cool gadgets provider, so take action now and come take a look at our site dx.com.

lcd timer switch Customers Reviews

  • Oh SNAP! (remotely, that is)

    posted by Infrasignal

    Canon doesn't even have a wireless timelapse remote trigger, and if they did, it would be crazy expensive right?
    Forgot to bring the manual? Not a problem since this one is so simple, even your spouse could use it.
    Comes with separate wire to connect the wireless remote to the camera so you can use it without the battery-operated receiver if needed. SWEET!
    The receiver even has a trigger button!
    Long-press the light button to lock the settings so you don't accidentally press a wrong button during the shoot.
    Uses standard AAA size batteries in the wireless transmitter. CR2 lithium battery in the wireless receiver. The package comes with batteries, so it's ready to use right away.
    I haven't range tested the setup yet, but I've been able to trigger remotely from the other side of my house between rooms/walls.
    Product description taken from manufacturer's site:
    JYC 2.4GHz Wireless Timer Remote Control JY-710:

    Features:
    ?Except for replicating all functions of a camera's shutter release button, it still has the function of Self-Timer, Interval Timer, Long-Exposure Timer and Exposure Count.
    ?Good for time-lapse photography such as flowers blooming and astrophotography.
    ? LCD panel can be illuminated
    ?Delay / Self Timer (DELAY)
    Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds.
    ?Interval Timer (INTVL)
    The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached.
    ?BULB/Long Exposure (LONG)
    It allows you to take time exposures up to 100 hours long.
    ?Exposure Count (N)
    This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times.

    Specification
    Timer delay:0s to 99hrs 59min 59s in one-second increments
    Exposure time:0s to 99hrs 59min 59s in one-second increments
    Interval:1s to 99hrs 59min 59s in one-second increments
    Number of shots:1 to 399,-- (unlimited)
    Power source:Two AAA 1.5V LR03 alkaline batteries
    Battery life:Approximately two months of continuous shooting with a delay of 5min, an exposure time of 4min 56s, and an interval of 5min. Use of the illuminator will reduce battery life
    Operating temperature:-20 -- +50C (-4 -- +122F)
    Dimensions:Approximately 155 x 40 x 18 mm (6.1 x 1.6 x 0.7 in), excluding projections
    Weight:Approximately 125g (3.7oz), with receiver
    Length of cord:Approximately 850mm (33.5in)z
    You cannot afford not to have this. I bought a cheaper non-wireless version from Deal Extreme a year ago and it already broke (probably because it melted when I left it in the hot parked car). This one will not suffer the same fate.
    Used it with no problems with my Canon 5D MkII and 30D.
  • Versatile little timer

    posted by Megaavr

    Low cost less than plug in power point timers but has exactly the same functions with a replaceable battery. It mounts via screws or using a standard DIN rail, internal construction as good as any other timer that I have that costs twice as much. The case is large enough to hold more circuitry maybe your own additional micro-controller or even using the case for your own project as DIN rail mounts cost far more.
    The unit comes with a 10amp relay installed but as it has provision on the board for the larger 20 to 30 amp profile it is an easy job to replace it with the larger ones, the internal cables should be ok to 15amps and are welded onto one terminal and crimped to the other.
    Very useful and versatile low cost timer with many uses.
  • Perfect for time lapse

    posted by rrudge

    Very cheap, and works as it should. Using it only for time lapse, but has other functions wich can be useful, such as long exposure for night photos.Better than I expected for the price.
    Posted a video recorded with this timer on Youtube, linked in this article.
    Found it a good gadget for my camera. Would recomend it for my friends.
  • Better alternative, than nikon’s original remote trigger itself

    posted by Siberex

    Easy to attach, easy to use.Good feedback from trigger (via LED and sound).Can be used in wired mode also (wire included).Good enough made quality.Batteries included also.
    Perfect alternative to original trigger from nikon, and even more functional and useful than it.
    Highly recommended to whose who want to save some money.
  • Works just fine

    posted by thwibble

    Works as described. Lots of functionality. Easy to use. Receiver sits nicely on the flash-shoe if desired. Remote is comfortable to work with. DIP switches control which frequency to operate on.
    The manual shutter-release button on the remote doesn't have good tactile feel-back. It doesn't feel solid. However once the timer/interval mode is engaged you don't use it anyway.
    Would recommend. Considering that the official Nikon unit is twice this price and doesn't have half the functionality this is a good buy.

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections