DX  » view all heat tape » heat tape

heat tape

Every single heat tape displayed here is of a high level and the price is reasonable. As the number 1 cool gadgets provider, DX provides and delivers high quality products from China, worldwide. What are you waiting for? Buy now!

heat tape Customers Reviews

  • Cheaper, faster and better

    posted by DiosVengativo

    What can I say? The product comes very quickly, (10 days aprox) and is the exact product that I pay for.It works perfect and resists almost 250ºC (is the maximum temperature that I used to use).The size is ok, it's 16mm but do not know the length (and probably I will never know).
    The post was very fast... thanks a lot indeed.
    I recommend it for litle uses on Reprap's world.Look the other sizes to cover the hotted bed... this is very thin. It is a perfect size for nozzle or similar uses.
  • Great for heated build platform 3d printers

    posted by PieterNr1

    I needed something to 3d print on. And needs to be Heat Resistant. Well this did the job. Not only that the printed material does not stick to it after it cools down. That was exactly what i needed.
    When needed i can be removed it will leave no residue. It cloud also be used as a replacement for kapton tape but i did not try that
    If it would be wider 12cm it would be easier to apply. Now i need to add more than one layer but that it not a problem.
    Great value for money ! Ik will order more in the near future
  • Good product

    posted by aayala

    Good quality, sticky enough. I use this tape to isolate different electronic components. I tested the resistance to heat using a heat gun, the product supports more than 350 degrees Celsius. Also it was exposed to direct flame and takes very long to burn.
    This tape is not easy to find in my neighborhood, much less at this price. Good buy. Mine came in yellow, as it should be.
    Buy it, it never hurts if you work with electronics.
  • Like true kapton

    posted by diogocarvalho

    This tape is not fake, is just like the original. It handles 300ºC without problems. I have used it to fix a temperature sensor to a heater. Very useful to electrically insulating between components and the heatsinks. This tape can be used in masking of circuit boards during resoldering, transformer and capacitor insulation, powder coating and high temperature applications and other electronic manufacturing processes. Is a wider tape, good for large areas.
    it is a bit thinner than I expected
    Will buy again when I need more
  • A must have for a Reprap 3D printer

    posted by marcoda

    This kapton/polyimide tape is the width of the standard 200mm glass used on the Prusa Mendel and other Reprap 3D printers. Leave no lines or tape marks under your prints. PLA adheres very well and comes off easily after it has cooled. I have not tested ABS yet. It has very good adhesive.
    It is almost impossible to get a 100% smooth surface by just sticking it and trying to remove the air bubbles and creases. The best way to apply this size tape on your glass is using the soapy water method. Using a spray bottle with water and dish washing liquid mix, spray the glass and the adhesive side of a piece of the tape that is cut slightly longer then your glass. Place the tape on the glass and move it into the right position then using a squeegee or a credit card squeeze all the water and air bubbles out from under the tape. Let it dry properly before heating it. As it dries the tape might roll on the edges, just stick the edges back down, the stickiness will return when the soapy water dries. Lastly cut the excessive tape from the ends.
    Best value and good quality. Never use multiple strips of tape again.

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections