DX  » heat shrink tubing » view all heat shrink tubing 5m » heat shrink tubing 5m

heat shrink tubing 5m

You'll find the best heat shrink tubing 5m for you here. At DX all products are checked in the quality control department before being packed and sent to you. Your support is our greatest motivation.
Related Hot Products: 5m black heat shrink tubing

heat shrink tubing 5m Customers Reviews

  • I was expecting a bit more

    posted by Neowizard

    - Does exactly what it says. You heat it up, it shrinks to about 1.5mm- Easy to cut- Small package so it easily fits into any toolbox (no matter how crowded)- Rather flexible so it doesn't get too damaged while it's packed tight.
    At the end of the day, it work. I'm not sorry I got it, and I think most people won't be either.Just keep in mind that there's some points that could be improved
    If you need to mend a bad earphones cable (or something like that), and you don't want it to look like crap, this will do the trick.
  • Great, inexpensive, good quality

    posted by AlphageekYVR

    Good luck finding heat-shrink tubing for less... or even double... or triple the price. FWIW, I received 5.2 meters - BONUS!
    It's inexpensive so no worries.
    If you need H/S tubing this is a deal. Probably more than you'll ever need. I bought 5 sizes and will split it with another DIY friend.
  • Performs great, though it does shrink 2.5-3mm vs 3.5mm

    posted by Bonejj

    Works like it should, shrinks well and does not melt like other cheaper forms found on other sites. Also no tearing issues as it shrinks.
    I like it, thought don't mistake the 5M for 5m, 5M seems to be the "brand", not the length. It's more like 9 feet, give or take a little. as Mentioned above I would like it to come on some kind of spool but I know I'm asking too much there.
    Overall, works great and I find it fits my needs well. Could be a little cheaper though.
  • diameter too large

    posted by davovinch

    tough, well made, cheap
    If I were todo it again I would have ordered the multiple size pack to make sure I got what I needed.
    this is thick walled stuff and might not be appropriate for your project due to sizing and weight/stiffness. I work mostly with model airplanes and this shrink tubing would be more appropriate in an industrial setting.
  • Tiny for tight spots

    posted by LittleBitMore

    Tiny, low profile anodised aluminium. Doesn't foul other chips or case.Peel and stick. Eight in one package is a good number as it will suit a number of applications.
    Works well on Raspberry Pi model B for both large chips.I left a heatsink off the regulator as the pins for the reset button are adjacent to the regulator chip and I haven't soldered them on yet.Clean top of chip to be cooled with methylated spirits, allow to dry before applying heatsink. I used a pair of tweezers to place the heatsink in the correct position before pressing down to ensure it was firmly adhered.
    Easy to fit. Works well.

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections