DX  » view all heat resistant » heat resistant

heat resistant

Buy a heat resistant from DX.com! It's your best choice. DX offers worldwide free shipping and faster delivery. With your support, we can do better.

heat resistant Customers Reviews

  • Great for heated build platform 3d printers

    posted by PieterNr1

    I needed something to 3d print on. And needs to be Heat Resistant. Well this did the job. Not only that the printed material does not stick to it after it cools down. That was exactly what i needed.
    When needed i can be removed it will leave no residue. It cloud also be used as a replacement for kapton tape but i did not try that
    If it would be wider 12cm it would be easier to apply. Now i need to add more than one layer but that it not a problem.
    Great value for money ! Ik will order more in the near future
  • Just like the original

    posted by richardgr

    The tape is just like the original. It's heat resistant and usually used to keep electronic parts in place and insulated. For example it's used in laptops to keep some wires in place or to tape a wireless card so it does not move or cause a short circuit. The original tape is more expensive (even without shipment costs) and even though the item seems to be a copy mine is still labeled Kapton just like the original :-)
    Have a look at the wikipedia site regarding Kapton and you will find answers to all questions regarding this item: http://en.wikipedia.org/wiki/Kapton
    Will buy again when I need more.
  • useful and well made

    posted by ilank

    Well made of good material. The material feels solid, yet is very flexible, which allows it to be stored in small spaces.Keeps the pot away from sensitive surfaces.Comes with a handy vacuum hook to hand it on
    It's bright orange. You might want to verify that it fits your kitchen :)
    Good buy. I'm happy with it. Would buy it again.
  • excellent tape

    posted by enry80

    cheap- real specification with more tolerance for hight temperature (300ºc over short times) but holds stick- very good indeed. the specification over the temp is really true and overpass the standard specified.it´s handy and I can use it again the piece of tape.
    -the glue in over-high temperature (over 275ºc) becomes muddy and gummy. -*slightest details*-it should be other size tapes with this fetures.-you can´t use it again the piece of tape if it was applied over temperature, the issue is the glue no the same tape.
    Very Good tape and cheap!
  • A must have for a Reprap 3D printer

    posted by marcoda

    This kapton/polyimide tape is the width of the standard 200mm glass used on the Prusa Mendel and other Reprap 3D printers. Leave no lines or tape marks under your prints. PLA adheres very well and comes off easily after it has cooled. I have not tested ABS yet. It has very good adhesive.
    It is almost impossible to get a 100% smooth surface by just sticking it and trying to remove the air bubbles and creases. The best way to apply this size tape on your glass is using the soapy water method. Using a spray bottle with water and dish washing liquid mix, spray the glass and the adhesive side of a piece of the tape that is cut slightly longer then your glass. Place the tape on the glass and move it into the right position then using a squeegee or a credit card squeeze all the water and air bubbles out from under the tape. Let it dry properly before heating it. As it dries the tape might roll on the edges, just stick the edges back down, the stickiness will return when the soapy water dries. Lastly cut the excessive tape from the ends.
    Best value and good quality. Never use multiple strips of tape again.

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections