DX  » view all female pin » female pin

female pin

You will be surprised our best female pin with an artful design and an amazing price. Dx offers a range of products from consumer electronics to outdoor sports gadgets and so much more. At DX there is something to suit everyone. You can also browse male female pin and 1 pin female. Find your beloved cool gadgets right now.
Related Hot Products: diy female pin

female pin Customers Reviews

  • Works as expected

    posted by corvato

    - Supports 3.3V and 5V 1.8'' microSATA drives- easy to install and use
    Be careful choosing this adapter, it fits only microSATA HDD/SSD drives, IT DOES NOT fit miniPCI-express, miniSATA or whatever else there is.microSATA is a smaller version of SATA connector for 1.8'' drives used in some ultra portable laptops/tablets. These drives can be designed to use 5V DC power input or 3.3V - this adapter fits both types. It apparently has internal voltage regulator which provides 3.3v input even if the SATA cable itself doesn't.
    Adapter fits my toshiba hdd1f15 1.8'' 3.3v HDD and the drive seems to run OK. Good price for the useful product. I only hope it won't break too soon.
  • Good for PCB but not wire connection

    posted by yrnkrn

    These are standard microUSB SMD sockets. Not much to say here.
    microUSB sockets are great for projects since chargers are standard and everywhere.
    These sockets may be useful to solder with PCB but not to wires "DIY" projects.
  • Wonderful!

    posted by maarius

    I have used this one for communicating with a Cisco 2950 Series, works fine. Remember to set correct speed for the COM-port reader for your specific switch before using, or else it will not work. Good quality cable, feels nice. No real cons. Very similar to the one Cisco sends with their switches. (without "Cisco" markings" )
    An absolute need for a networking administrator. A cheap cable with a million uses. When you buy, it is recommended to buy more than one; the cables are easy to loose!
    Great cable, no questions asked. Good buy!
  • It does the job

    posted by Nemerix2

    It works fine with both native IDE port and IDE to USB bridge. Speed seems to be OK.
    It can't really be made much smaller so it will fit almost anywhere. As it is very small and light it is mechanically quite robust when fitted to a hard drive.
    It could be usefull to have a possibility to fit an external power source if the IDE connector doesn't do the job.
    The attached drive seems to be able to boot through this however the system I had connected it to did't start up all the way. It ended up with a windows mups.sys hang on Windows XP but I have no clue if this board is to blame.
    If you need such a device you can try this one as it seems to work fine.
  • Good Purchase

    posted by OldRock

    Inexpensive, simple,and well constructed adapter, this will turn any OBD II reader in to a Mercedes Benz diagnostic tool.
    Useful in any workshop and car garage, solves the problem of Mercedes using different adapters from other brands.
    Anyone who has a Mercedes Benz, can turn a cheap diagnostic tool in a new one for the MB brand.
    So cheap, that it is a mistake not to have it. No excuse whatsoever.
    Very good. A must have.

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections