DX  » 12v white led » view all diy white led 12v » diy white led 12v

diy white led 12v

Customers Who Bought diy white led 12v Also bought

You may find that it is quite easy to purchase diy white led 12v here and you can save money at the same time. As your loyal companion, you'll find thousands of cool gadgets here at DX. led white 12v bulb and led 12v white 3w are the hottest keywords that customer use. Rest assured by shopping at dx.com.
Related Hot Products: 12v led light white, 12v white led car, 12v led warm white, 12v waterproof led white

diy white led 12v Customers Reviews

  • Good LED Turn Lights

    posted by TMA86

    Plug and play. Very easy to install. Goog LED quality, very powerfull in daylight. Very cheap. The carbon graphics in behind, look wonderfull.
    Make sure you connect the rights wires. Positive with positive and negative with negative (usually are the black ones wire). Looks good in any motorcycle. You can but this item and you won't regret it.
    I recomend this item. The quality in 0 to 10 are 7
  • Muy buen led

    posted by ballentino

    The shipmet from argentina delays 15 days, this is excellent, another products delays 20 days. Includes the correct resistence for work with 12v and the best bright! 6000k color temperature, realy white! The wire it's made of a excellent quality, realy easy for welding!
    If you need leds for 12v this is the better bundle what you can buy!
    Just leds for 12v, my review no needs more info, 5 starts to this product!
  • Excelent quality power led

    posted by mrdevil831

    Warm white, good light, very good eficienty, starts working at about 6v. I think optimal eficiency would be at around 9.3v.
    Color temperatoure couldbe a little lower.
    A nice high power led at a very good price. I recomand this for hobbyst that like to experiment with low power and high eficiency.
  • Surprisingly bright!

    posted by farmandkbh

    Planning to make a reverse light for the car. This LED in series with a 3,9 ohm 5 W resistor and a heat sink will do the job (avg 13.6 volts on my car). Could use a constant current driver (ex. SKU 3256) but i think it's a bit overkill and the resistor is a lot more safe in this environment.
    Just waiting to make comparisation with the std bulp!
    Highly recommended, but remember that current must be regulated rather than voltage


Get great weekly deals and offers like: Collections