DX  » view all diy board » diy board

diy board

Check out the great diy board to see if there is any that suits you. We hope every customer enjoys their shopping experience at DX.com. Your support is our greatest motivation.

diy board Customers Reviews

  • Fun for the family

    posted by AtilaSendil

    First of all there are more than 12 pieces which is a nice surprise :-) The foam is just the right flexibility. Each package has a a bead to make the ending. There are different colors of strings :-) There are a lot of instructions on the internet on how to braid.
    Nice to pass time and have something. A nice activity for the family :-)
    Buy this and give as gift to family and friends; but master it yourself first to teach them :-)
  • Great DIY repair for singe AA flashlights

    posted by QBranch

    Great to have around for repair of small single AA flashlights. I have four HUGSBY P31 lights (sku: 35078) and unfortunately 3 have failed. Found out that the emitter and switch are fine, so it must be the emitter board. So I found these on DX and ordered 5. These fixed all 3 of my P31 lights. BUT be aware that 2 of the 5 sent were 3 mode boards (Hi-Lo-Flash) and 3 were 1 mode (Off-On). The SKU stickers on the zip baggies were identical (128096). Note that the black boards with a larger baggies were 3 mode and the green boards with small baggies were 1 mode.
    Items got sent in a bubble mailer envelope and 1 emiiter got smashed.
    Great DIY repair board and to have some around for spare.
  • Good DC input buck driver for LED currents up to 2A

    posted by lm833n

    - Capable of LED currents up to 2A; preset at 1.8A- Wide DC input voltage of 5~40V- Connections are well marked on PCB- External MOSFET (20N06, 0.046ohm max) and schottky doides (SS54, big!) mounted on one side, can easily attach to heatsink using thermal adhesive eg sku.135352
    - Uses the QX5241a chip. Vref is 205mV, Rsense are two paralleled 0.22ohm to get about 1.8A output.- Can be modified for lower current: I=(Vref)/(Rsense)eg 0.14ohm gives about 1.46ASuitable 1.8A LEDs: sku.189569, sku.101095, XM-L and XM-L2 (reduced brightness)1.5A LEDs: sku.81837, sku.199872, sku.203212
    If you have a DC supply and find the PT4115 lacking juice, this 5241a driver might be the answer.
  • does its job

    posted by rayho

    - works as described- pretty cheap for two
    bought this to repair a DOA Waterproof SA-R2 Stainless Steel CREE XP-E R2 WC 5-Mode Memory 240-Lumen LED Flashlight (1*AAA) sku#47661, so it does fit with a little bit of filing
    great option for repairing AAA battery flashlights, does its job, i didn't need the 5 different modes anyways
  • Bright RGB LED for Arduino projects

    posted by Odimljeno

    - very bright light (almost too bright as it is hard to look at it directly) - works with Arduino (example on how to test it: http://www.arduino.cc/en/Tutorial/ColorCrossfader) - nice and compact PCB with SMD LED - good build quality
    This is not going in some project, I just like playing with this colorful thing and that the entire reason I bought it. :-)
    If the price is good for you buy it.

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections