DX  » view all cree xm-l 2 » cree xm-l 2

cree xm-l 2

Customers Who Bought cree xm-l 2 Also bought

You'll find the best cree xm-l 2 for you here. At DX we strive to provide the best service possible for our customers, with a prompt and helpful response. Visit now and experience our quality service, brought to you from China's leading online retailer.

cree xm-l 2 Customers Reviews

  • Best bike light value on DX

    posted by wgibso

    Great price, small, BRIGHT, good battery capacity. Everything you need is included: battery pack, charger, all mounting hardware. Connections are nice and secure, and appear watertight.Lights up the road a lane wide for a good 20 - 30 meters in front of the bike, even on a pitch dark road.
    This is perfect for my commute, on which I average around 18 - 22 mph (29 - 35 kph). You'd start to outride the beam at around 30 mph (48 kph) I'd think, so I wouldn't take it down any fast technical road descents. It'd be great for mountian biking, though, because the beam is so wide and bright.It also comes with headgear to wear it as a headlight, which'll be handy for camping.
    Function is everything I'd hoped, and it looks nice on the bike, too. This is the one to buy.
  • Brigth and cheap torch! great deal

    posted by miguelm2007

    Really very cheap, you will not find anything like this at this price, very bright, i use it for my bicycle with the sku:31871 mount but i can detach it and use it everywere, really a nice lamp, i'm a previous owner of one sku:39359 this one are more bright.
    the lamp it's cheap an very bright, i will buy more in a future.
    buy it, you will not regret
  • Nice head torch

    posted by drsolly

    It has two 18650 batteries in parallel, so it should last a long time. It has a good spotlight,plus some light around it. And it has a red light at the back (the DX description didn't make that clear), which makes it good as a biking headlight; cars behind me can see me. It comes with a little charger, in case you don't own one.
    Comforable to wear, angle of light is adjustable.
    This is coming out biking with me.
  • Solid flashlight with heat problems

    posted by azev

    -Ergonomic handling for regular European hands (middle finger slightly touches my palm when grabbing firmly)-Modular extension for using 3 cells (18650 & 26650), you have the flexibility to use either 2, 3 or a combination of both as needed-Digitally regulated 25W power drain, 92% driver efficiency at 12,6V, so LEDs get ~23W -> 3,23A@8,4V -> 2A@12,6V-Driver works at high power from 7,8V (28,18W) to 13V (25,5W), not tested above 13V-XM-L T6's are driven very efficient @~3,3W brutto (max. rated 10W)-As bright as two H4-55W car headlights in 20yo reflectors-LEDs glued to the flashlight head with some kind of white silicone. It is 5,8mm strong in its back part, so the heat can dissipate really good.-Easy to maintain: Reflector is screwed to the head with two fine-thread Philips-head screws, circuit is held down by a spring and a brass swivel-Spacers dimensions allow you to use protected 18650's-Nice brass caps cover contact springs in the head and tail
    -Plain tailcap allows you a relatively steady tailstand (this thing can illuminate a whole room when pointed to the ceiling)-When using the lowest brightness, PWM is quite visible and disturbing when moving-When using the lower brightness modes, a slight buzzing is noticable (only if you listen carefully)----------Temperatures measured with the driver taken out of the head (it kept realtively cool, due to convection) at 11°C environment temperature. The Flashlight was turned on 12 minutes at full power; temperatures did no longer increase significantly after that time. Due to taken out driver I calculate the estaminated temperatures (increased heat from the inserted driver not included, so you might add another 20°C):-> measured Value + 11° + Head temperature = Expected temperatures of the installed driver @22°C room temperatureTemperature estimation for assembled torch:-Head 60°C -> 71°C-Driver ‘Q5’ (near the inductor) 65°C -> 136
    Its an honor for me to do the first review for this flashlight.With this SKU you recieve a flexible flashlight of good mechanical quality; LEDs are driven really efficient with ~3,3W each.On the other hand this item grills itself when running longer than 10 min. Those temperatures are way too high for DC/DC and schottky-diodes (125° core temp. is their specified max. operating temperature!), so you better keep an eye on the runtime (and head temperature!).5 - 8 min. runtime in the highest position should be okay.Finally, it gets heavy when using 3x 18650's, even more with 26650's, which could be an advantage, if you use it for security purposes (think of MagLite’s).
  • Could be much better.

    posted by WolfY63

    I have 2 SKU: 29069 Diving Cree SSC-P7-C-SXO 3-Mode 900-Lumen LED Flashlight Kit that I liked, but needed 2 hands to handle, in order to switch the light on. As I saw this one I ordered it direct. The dimmer/ slide switch is better for divers. Also a more slim and smaller diameter design is plus. Light image is good with very bright center and good outer aura.
    Today I wanted to put fresh charged batteries inside but it stopped working. As I closed the back cap just before the end of screwing it to bottom, the light gives a short flash although the slide switch is off. Switching the dimmer on giving no results and the flash light is dead. It looks like there is some hidden electronics in the cap that might be bad. Will wright this to DX service and see what happens. Unfortunately I bought in 14 months ago.
    Very good light when works. Worth the money.

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections