DX  » usb to » view all all to usb » all to usb

all to usb

Customers Who Bought all to usb Also bought

Every single all to usb displayed here is of a high level and the price is reasonable. As the number 1 cool gadgets provider, DX provides and delivers high quality products from China, worldwide. Customers who purchased all to usb also viewed usb to rj45, usb to ipad. With your support, we can do better.
Related Hot Products: usb to lan, usb to usb, lightning to usb, usb to ttl, esata to usb, 3.5mm to usb

all to usb Customers Reviews

  • Excellent choice!

    posted by Vadim048

    This device is easily installed, has an attractive price and high quality made??! An additional advantage - the ports are USB v3 on the front of the computer, there is no need to use extension cords or go to the dusty side of your computer. Included the screws (after the installation is not fully used up.) Cords of sufficient length, they are quite flexible and seal (in my case - two different system blocks) was simple.
    Red LED could be not so bright in comparison with its green brother. After connect this device - do not forget to install the driver from the supplied CD.
    Overall - a great unit with excellent price. Plug this - and your computer is ready for SuperSpeed ??USB v3!
  • Very Usefull Tool

    posted by carbafx

    The packaging is quite good. It came with a mini-CD with drivers. Easy to use and understand how it works.It was tested with Notebook HDD Sata and IDE.It works like a chamr when your computer crashes and you need to do a Backup of the drive.
    It is a good purchase for the right price.It tooks 23 days to arrive into Argentina.
    Nice tool for computer technicians, that need to perform backups from customers PC and notebooks.It works with SATA2, IDE 3.5", IDE (NB).For PC disk (3.5") the power needs to be used, for the NB disk, only with USB can work
  • Very Good product for the price

    posted by lcoll

    Robust, the power adapter for instance is better than my notebook's adapter. Support for IDE and SATA is a great feature. The cables and the adapter itself are very well built.
    Good product, I recommend. It could be USB 3.0, but as I don't have a USB 3.0 mother board, it's reaaly not a con to me.
    One week using it, no problem until now. I'll keep using it, in the case that any problem shows up, I'll come back here and write a review, but it doesn't seem like it will, the adapter really gives you confidence.
  • What a great product

    posted by AmigaWolf

    So i bought this PCI-E to USB 3.0 Host + All-in-1 Card, so that i have USB 3.0 on the front of my ASRock X58 Extreme3, because i only had USB 3.0 2x on the back.Installing was really easy, and installing the driver from the CD was also very easy.So i had to plug it in a PCI-E 1.1 x1 slot because my 2x PCI-E 2.0 x16 slots are full, so i have only a PCI-E 1.1 x4 slot and a PCI-E 1.1 x 1 slot, so i used the PCI-E 1.1 x1 slot.So i put my old OCZ Vertex SATA II 2.5" 30GB in my USB 3.0 casing and plug that in one of the USB 3.0 slots, and tested it with ATTO Disk Benchmark and i get Write: 121MB/s and Read: 173MB/s.Thats not bad for a PCI-E 1.1 x1 that gives max 250MB/s, maybe i will get 250GB/s if i had a newer SSD.But with PCI-E 2.0 1x slot you have to get 500MB/s Max.Also tested my 32GB MicroSD card Class 10 and get the max out of it, Write 15MB/s Read 20MB/s, the Memory card slots use a USB header on the motherboard.
    If you have a older motherboard and don't have USB 3.0 or do not have it at the front, then this is perfect for you, and as bonus you get a memory card readers also.
    Must have if do not have USB 3.0 on your motherboard, or do not have USB on the front of your Tower (computer).

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections