DX  » smd white led »  view all 300x5050 smd led white » 300x5050 smd led white

300x5050 smd led white

The perfect 300x5050 smd led white here to meet all your needs. Here at DX we have a huge range of products for you to search from. Of course, you can find them from led t10 smd white, led e27 smd white. Read independent customer reviews to see just how large and popular DX online retail website is.
Related Hot Products: smd white led waterproof, smd led white light, led smd white 5050, smd led warm white

300x5050 smd led white Customers Reviews

  • Not a bad

    posted by alibek

    - waterproof- comfortable light distribution- handy AC unit
    A good tool for highlighting. However, the kitchen is not enough brightness. Next time will order the tape from the power of 72W. This tape, I fixed on the arch of the door.
    If you buy the tape for highlighting and not for decoration, the brightness can be insufficient.
  • Very good

    posted by pivachristian

    I use it outside, over my garage door. The lighting is really strong: better than the lighting of the road! After 3 months of use, the luminous intensity did not decrease, and no led was broken.I have of also to cut the strip to make an angle, and it is very easy to solder it again :)
    The LED warms just little bit. I have already bought other products of this kind, but this one is really the best!!!
    If you need a strong light, for a good price: don't hesitate, BUY IT!!
  • Light the darknes

    posted by Allmaker

    Light is great and very bright. Truly warm white. The power switch was added from factory to 12,19 volt`s. And the light strip is VERY bright whit that voltage. I drop`d the voltage to 10,5 volt`s and did drop the bright`s to the level i want`t. The good thing in the power switch is that you can adjust the out put volt`s.
    long 5M
    Cutable every 3 led`s
    Remember to adjust the voltage if you cut this.
    Even so even check the volt`s, not to burn the led`s.
    Good product. Warm white like it says. The tape is perfect. What ever you plane to whit these just do it.
  • Lot of light for little money

    posted by abrilman

    Colour is really cool white, not blue like shown in the DX picture.Lots of light!All 300 leds are functioning well.
    I had a LCD TV with a malfunctioning CCFL back light. The inverter was out of order.I decided to replace the CCFLs by leds. For the 26 inch LCDTV I used 8 strips of 5050 leds. See picture.They could be fed with the 24 V powersupplyResults:The colors are very natural. The intensity is o.k. as well.Illumination however, is not homogeneous. Bands of light are visible in images which contain large area's of same color.Advice: Use 24 strips of 3528 leds.
    Good product.
  • Bright! Good deal!

    posted by DharmaBum

    Bright. Flexible. Smooth surface makes them easier to clean. Good value!
    It's pretty easy to limit the current and hence power on these LEDs with a transistor and a resistor. I ran a small 55 cm at 8.3 watts (equivalent to 75 W for the whole 5m) and after about 30 minutes they are only warm to the touch, i.e, you can grasp them hold on for as long as you want. They will do fine even if you don't mount the strips to heat sinks. Dropping the wattage to an equivalent 54 watts for 5 meters results in less heat and about 50% less bright, as detected by my camera's light meter but barely detectable by eye. These strips are a great deal!
    If you want some great LED strips that can be used for cover and undercabinet lighting buy these.

DX Everywhere