DX  » view all 2.4ghz module » 2.4ghz module

2.4ghz module

Customers Who Bought 2.4ghz module Also bought

You can find fashionable 2.4ghz module at a low price. At DX all products are checked in the quality control department before being packed and sent to you. Enjoy all these products that we have prepared for you.
aaaaa

2.4ghz module Customers Reviews

  • NRF24L01+

    posted by ecqu000

    Same design as suggested in chips datasheet, therefor working very well.Indoors range is around 10m as previous reviewer said, and outdoors range is over 50m, (that's how far i tested it only..)Board is really small 32x13mm.There are ready made libraries for Arduino (i tested with RF24 lib, but there is also one called Mirf)
    If you need one with more range, get the one with bigger antenna that is made by reference design from datasheet (available from DX).If you want to use it on mega 2560 or similar, then note that the pins are different than for uno and similar.DX is selling pack of 2 also, but last i checked buying 2 of these is cheaper than buying 2 pack.You can make more than 2 units talk to each other also.
    If you need to move a lot of data back and forth, between some mcu-s you will need this.Very quick to get it working on Arduino thanks for ready made libraries.And price is also better than anywhere else.
  • Transceiver with better on-board antenna

    posted by Gyro76

    Price, easy to connect and interface, onboard antenna (with better communication range comparing to smaller modules), good manufacturing quality (PCB, assembly)
    Connector pins distance is 100mil (2.54mm) which is fine.
    Works fine with PIC16F819. Output pins are not tolerant to short circuit. Input pins are 5V tolerant.
  • Great way to build a multi-node wireless environment with Arduinos

    posted by rigorka

    Reasonably cheap and pretty reliable wireless module. Works well in the building when a distance is within 10m and there are not too many thick walls between the nodes. Supports retransmission and data integrity control, makes the programming very straightforward. Excellent Arduino library is available.
    For those needing to cover longer distances there are versions of this transceiver with the external antenna available on DX. Noticeably more expensive of course.
    The best wireless module for the tasks of home automation that I know of.
  • Very nice transceiver

    posted by Gyro76

    Size, price, easy interface, on-board tuned antenna, assembling is very easy to main PCB.
    Ideal transceiver to use in tiny DIY gadgets for small distance communication (in a room).
    Can be used with almost any microcontroller (ATMEL, PIC)... I used PIC16F819 and PIC12F629 (SPI written in assembler). Works fine. SPI communication speed can be as low as needed by microcontroller.
bbbb

DX Everywhere