DX  » iron case »  view all 12v iron case » 12v iron case

12v iron case

Customers Who Bought 12v iron case Also bought

Welcome to our 12v iron case online shop. At DX all products are checked in the quality control department before being packed and sent to you. With your support, we can do better.

12v iron case Customers Reviews

  • Compact power supply

    posted by jlramirez

    Power supply well built, sturdy and really delivers the marked current in the case.When loads 4 amperes the voltage don't drop down.The oputput voltage are regulated with a variable resistor, is useful but not necesary.
    Well ventilated case, if the power supply is heated, you can add a little blower.You need to put some spacer in the bootom of the case, you can buy in Dx.
    Good device to mount a little laboratory or made some electronics stuff
  • Hard Case 12V Power Supply

    posted by Kreator99

    This power supply is perfect to embed into power hungry devices. It can provide **almost** 10A in continuous mode without to much heating.It has two **independent** outputs.Metal case is quite hard and the drilled holes prevent the power suppply to heat too much.Performance is good enough.
    Buy one if your devices need 12V and lots of power.
    I have two of this power supplies, the first one has been powered for months without a single failure.
  • It did the job like expected

    posted by ppaiva

    It is a good power supply.I used it with 30 meters of 65714 LED strips consuming something around 12A.It provided a well stabilized 12.2Vcc without any notable noise.
    I would definitely use this model again in another occasion that requires those specifications.
    Just a regular power supply.It does what it does.
  • It works good

    posted by Fipo7294

    - Output power is for LED strings enough - It's look fine- No problems with output paramameters- Universal input-Adjustable output Voltage with trimmer, of course in small range
    I working with Switch mode power supply. And I am not sure with quality yet. I didn't open it, In SMPS is transformer really sensitive element.And the housing of this look like iron, but really thin iron case.. Actually is for nothing But if you want avoid to any mechanical damage, Be careful with that.
    Except case of this supply, I am satisfied with it. I can recommend this SMPS.
  • Very good and noiseless!

    posted by miguelbz

    Cheap, lightweight, usefull and noiseless in HF, works without heating, the fan is quiet.
    I use with my IC7000, TS590, TS130, it's a great companion for it. You can use in field day and as a desktop power supply. It's a industrial power supply designed for use inside products but works very well.
    As a ham radio operator, I recommend, if you need a 12v HF radio power supply, simple but working this is your choice. 73

WHY CHOOSE DX.COM?

Get great weekly deals and offers like: Collections